Summer Starts Here - Save up to 70%
Yakima Roof Bike Racks Review - 2019 Chevrolet Suburban- Video
Hi everyone, Adam with etrailer.com, today we're going to be taking a look at the Yakima Highroad roof rack bike rack on our 2019 Chevrolet Suburban. So this is going to be a great bike rack for some of your higher-end bikes. It doesn't have any frame contact and it just clamps on this front-wheel here. And it does have a little wheel cradle in the back with a cam buckle type strap. So the way that this bike rack secures your bike into place is going to be monitored by this torque right nob, by turning it to our right. It's going to bring this bar up and clamping down onto your wheel. more
10/3/2019 12:32:50 PM
Yakima FrontLoader Roof Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our 2014 Chevrolet Suburban we're going to be test fitting the Yakima FrontLoader, a wheel mount roof bike rack with part number Y02103. With our factory roof rack already on the Suburban we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front we're going to want the two outside arms of the clamp in the front of the crossbar and the single middle arm of the clamp behind it. We'll then tighten the black t-handle located on the front. This will squeeze our front crossbars securing our rack. Here at the rear we're going to loosen the black t-handle. This will allow us to remove the t-bolt from the lower portion of our clamp. more
6/3/2014 10:58:31 AM
Yakima ForkLift Roof Mounted Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our 2014 Chevrolet Suburban were going to be test fitting the Yakima Forklift, a fork mount roof bike rack with part number Y02098. With our factory roof rack already on our Suburban well begin our test fit by placing the bike rack directly onto our cross bars. Here at the front well remove the skewer, slide back the black cover and loosen our T handle. This will allow us to remove the T bolt from the slot in the lower portion of the clamp. Well then bring that lower portion of the clamp around the underside of our cross bar, put our T bolt back through the appropriate slot and tighten it down with the T handle. With the clamp secure well slide our black cover forward again, and then reinsert our skewer. more
6/3/2014 10:58:27 AM
Thule Sprint Fork Mount Bike Rack Review - 2014 Chevrolet Suburban- Video
Speaker: Today on our 2014 Chevrolet Suburban we're going to be test fitting the Thule Sprint, a fork mount roof bike rack with part number TH528. With the factory roof rack already installed on our Suburban we'll begin our test fit by placing our bike rack directly on to our crossbars. At the front we're going to place the strap into the front foot of the carrier. We'll use the black lever on the rear of the foot to tighten our strap around our crossbar. With the front tight we'll move to the rear and we're going to repeat the same tightening process. With our rack secured at our vehicle we're ready to load up our bike. We'll first undo our rear wheel strap and make sure that our front skewer is open. We'll then grab our bike, place our bike on the bike rack. more
5/30/2014 4:34:18 PM
Swagman Upright Roof Mounted Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our Chevrolet Suburban, were going to be test fitting the Swagman upright roof bike rack, part number S64720. With a factory roof rack already on our Suburban, were going to begin our test fit by placing our bike rack directly onto our cross bars. Here at the front well bring one of the U-bolts around the underside of our cross bar and fit it up through the head of the carrier. Well then thread on two of the wing knots to help hold it in place. Well take a second U-bolt and well repeat that same process, bring it up to the head of our carrier and threading onto the wing nuts.We can then tighten all four of the wing nuts down. This will secure the front of our rack. more
5/29/2014 5:00:42 PM
Swagman Fork Down Roof Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our 2014 Chevrolet Suburban we're going to be test fitting the Swagman Fork Down, a fork mount roof bike rack with part number S64710. With our factory roof rack already on the Suburban, we'll begin our test fit by placing our bike rack directly onto our cross bars. Here at the front, we'll bring one of the U-bolts around the underside of our crossbar, fit it through the head of the carrier and hold it in place by threading on two wing nuts. We'll take a second U-bolt and again, we'll bring it around the underside of our crossbar, fit it through the head of our carrier and place two wing nuts on it as well. We'll then tighten down all four of the wing nuts and that will have the front of our carrier secured to our crossbar. We'll now move to the rear. Here we're going to place the U-bolt down through the rack, being sure that the threaded portion of it comes out on both sides of our crossbar. We'll then place on the black metal plate and hold this in place with two wing nuts. We'll then tighten down both of our wing nuts to secure the rear of our rack and just like that, we're ready to load up our bike. We'll first undo our rear wheel strap. more
5/28/2014 12:56:04 PM
SportRack Roof Mounted Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our 2014 Chevrolet Suburban we're going to be test fitting the sport rack roof mounted bike rack, part number SR4622. With our factory roof rack already on the Suburban, we're going to begin our test fit by placing our bike rack directly onto our crossbars. Here at the front, we'll bring one of our black rubber coated metal U-bolts around the underside of our crossbar, fit it through the head of our carrier, and thread on two wingnuts to hold them in place. We'll then take our second black rubber coated metal U-bolt and repeat that same process. With all four of our wingnuts started, we'll go ahead and tighten them down. This is going to secure the front of the rack to our vehicle. With our front secure, we'll move to the rear. Here we're going to take the black plastic portion of our clamp. more
5/28/2014 12:54:47 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our 2014 Chevrolet Suburban were going to be test fitting the RockyMounts Tierod Stretch, a fork mount rook bike rack with part number RKY1011. With our factory roof rack already on the Suburban well begin our test fit by placing our bike rack directly onto our crossbars. Here at the front were going to bring the two black rubber coated metal straps around the underside of our crossbar. Well then remove the black cover, fit these straps into the head of our carrier and then tighten down the Allen bolt located on the front with an Allen key. With both straps in front tight well replace our cover and our front is secure. We can then move to the rear. more
5/27/2014 10:19:45 AM
Kuat TRIO Roof Bike Rack Review - 2014 Chevrolet Suburban- Video
Today on our 2014 Chevrolet Suburban we're going to be test fitting the Kuat Trio, a fork mount roof bike rack with part number RU01. With our factory roof rack already on the Suburban we're going to begin our test fit by placing our bike rack directly onto our cross bars. Here at the front we'll bring one of the black rubber coated metal u-bolts around the underside of our cross bar, fit it up into the head of our carrier, and then we'll thread two cylinder nuts on it to hold it in place. We'll then take our second black rubber coated u-bolt and repeat that same process. We can then take the included tool and tighten down all four cylinder nuts to secure the front of the rack to our Suburban. With the front secure we'll now move to the rear. Here we will remove one of the wing nuts, separate our clamp, bring one of our bolts to the front side of our crossbar leaving one behind, reinsert the bolt through the metal portion of our clamp, and thread on a wing nut. more
5/20/2014 11:15:03 AM
Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban, we'll be test fitting the Yakima ForkLift Roof Mounted Bike Rack, part number Y02098. With the factory roof rack system on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicle's crossbars. Starting at the front of the bike rack, we'll remove the skewer, and position the bracket around the underside of the front bar. We'll insert the silver T bolts into the slot on the bottom portion of the bracket. We'll then tighten down the black wing nut to secure the front part of the bike rack to the front crossbar. Now moving to the rear, we'll position the rear bracket around the rear crossbar. We'll insert the silver T bolt into the slot of the bottom bracket, and tighten down the black wing nut to secure the rear part of the bike rack to the rear crossbar. more
2/28/2014 12:38:30 PM
Kuat TRIO Roof Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban we'll be test fitting the Kuat Trio roof mounted bike rack, part number RU01. Today we'll be installing the Kuat Trio on our Suburban's factory roof rack. We'll begin our test fit by placing the bike rack up onto the vehicle's cross bars. Starting at the front we'll take the rubber coated U bolts to go around the underside of the front bar and up through the predrilled holes of the head of the carrier. We'll then take the cylindrical nuts, which we'll thread down over top of the U bolts. We'll then use the included tightening tool to tighten down the silver nuts to secure the front part of the rack to the front crossbar. more
2/28/2014 12:34:43 PM
Yakima FrontLoader Roof Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban, we'll be test fitting the Yakima frontloader, roof-mounted bike rack, part number y02103. With the factory roof rack on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicle's crossbars. We'll need to loosen up the black T handle, to position the front bracket around the front and back side of the front crossbar. Then moving to the rear, we'll loosen up the black wing nut, bring the rear bracket around the underside of the rear bar, insert the silver T bolt into the slot, and tighten it down with the black wing nut. We'll then move back up to the front, and tighten on the black T handle. Once everything is all tightened down and secured, we're ready to load up our bike. We'll unfold the front part of the wheel mount, and we'll undo the strap at the rear. more
2/25/2014 11:50:39 AM
Swagman Upright Roof Mounted Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevrolet Suburban, well be test fitting the Swagman Upright Roof Mounted Bike Rack, part number S64720. With the factory roof rack system on our vehicle, well begin our test fit by placing the bike rack up on to the vehicles crossbars. Here at the front, well take the silver U-bolts to go on the underside of the front bar up to the predrilled holes of the bike rack. Well then take our black wing nuts to thread down on to the silver U-bolts to secure the front part of the bike rack to the front crossbar. With this done, well move to the rear, and this time well take the silver U-bolt to go down through the predrilled holes of the bike rack. Well then take the black plate to rest them the underside of the rear bar, and then well use our wing nuts to secure the rear part of the bike rack to the rear crossbar. Once everything is all tighten down and secured, were ready to load up our bike. more
2/24/2014 1:19:22 PM
Swagman Fork Down Roof Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban, we'll be test-fitting the Swagman fork down, roof-mounted bike rack, part number 264710. With the factory roof rack on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicle's cross bars. Starting at the front, we'll take the silver U-bolts to go around the underside of the front bar, up through the pre-drilled holes of the front of the bike rack. We'll then take our black wing nuts, to thread down onto the silver U-bolts to secure the front of the bike rack to the front cross bar. Now moving to the rear, this time, we'll take the silver U-bolts to go down through the pre-drilled holes of the bike rack. We'll take the black plate, to rest on the underside of the rear crossbar, and then use the black wing nuts to tighten it down, to secure the rear part of the bike rack to the rear cross bar. Once everything is all tightened down and secure, we're ready to load up our bike. more
2/24/2014 1:19:14 PM
SportRack Frame Mount Roof Mounted Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban, well be test fitting the SportRack Roof Mounted Bike Rack, part number SR4611. With the factory roof rack system on our vehicle, well begin our test fit by placing the bike rack up on to the vehicles crossbars. Starting at the front, well take the rubber coated U-bolts to go around the underside of the front bar up to the predrilled holes of the front of the bike rack. Well then take our black wing nuts to thread down on to the silver U-bolts to secure the front part of the bike rack to the front crossbar. Moving to the rear, well take the black spacer to go in between the bike rack and the top of the crossbar. Well then take the two black bolts to go down through the holes of the bike rack and use the rubber coated plate to go in the inner side of the rear bar. more
2/24/2014 1:19:10 PM
RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban, we'll be test fitting the Rockymounts tierod stretch, roof-mounted bike rack, part number RKY1011. With the factory roof rack on our vehicle, we'll begin our test fit by placing the bike rack up onto the vehicle's crossbars. Starting at the front, we'll remove the black plastic cover, and position the rubber-coated steel straps around the underside of the front bar. Now moving to the rear, we'll remove one of the Allan bolts, to position the rear bracket around the underside of the rear crossbar. We'll then reinstall the Allan bolts and tighten it down with the included Allan wrench. Now moving back up to the front, we'll use the included Allan wrench to tighten down the silver bolt, to tighten down the straps up against the front crossbar. Once everything is all tightened down and secured, we're ready to load up our bike. more
2/24/2014 1:19:03 PM
RockyMounts TieRod Roof Bike Rack Review - 2013 Chevrolet Suburban- Video
Today on our 2013 Chevy Suburban, well be test fitting the Rocky Mounts TieRod Roof Mountain Bike Rack part number RKY1014. With the factory roof rack on our vehicle, well begin our test fit by placing the bike rack up onto the vehicles cross bars. Starting here at the front, well remove the black plastic cover. Well then bring the rubber coated steel straps around underside of the front crossbar and hook them back into the head of the carrier. Now moving to the rear, we'll use the included Allen wrench to loosen up 1 of the anvils to position the rear bracket around the underside of the rear bar. Well then use the included Allen key to tighten it down. Now moving back up to the front, well again use the included Allen key to tighten down the silver bolt to secure the front part of the bike rack to the front crossbar. Once everything is all tightened down and secured, were ready to load up our bike. more
2/24/2014 1:19:01 PM
Filter Videos
Filter Videos
